Acrylic plastic refers to a family of synthetic, or man-made, plastic materials containing one or more derivatives of acrylic acid. It can be colored, molded, cut, drilled, and formed.
Anodizing is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts. The process is called "anodizing" because the part to be treated forms the anode electrode of an electrical circuit.
Laser engraving metal plates are manufactured with a finely-polished metal, coated with an enamel paint made to be "burned off".
Slate is a fine-grained, foliated, homogeneous metamorphic rock derived from an original shale-type sedimentary rock composed of clay or volcanic ash through low-grade regional metamorphism.
Wood is a hard, fibrous tissue found in many trees. Wood engraving is one of the most popular applications for the laser because it can encompass so many different products.
A metal (from Greek "μέταλλον" – métallon, "mine, quarry, metal" is an element, compound, or alloy that is a good conductor of both electricity and heat. Metals are usually malleable, ductile and shiny.
Glass is an amorphous (non-crystalline) solid material. Glasses are typically brittle and optically transparent.
Granite is a common widely occurring type of intrusive, felsic, igneous rock which is granular and crystalline in texture. This rock consists mainly of quartz, mica, and feldspar.
Most laserable products are 2-ply laminates, the top layer (cap) of which can be burned away to reveal a contrasting substrate below, resulting in one-step signage.
We can personalise your leather products.
Correx is an extruded, twinwall, fluted polymer that can have a wide variety of additives to make it flame retardant, UV resistive, biodegradable. As colour is added to the base polymer any variation of colour can be produced. Correx is fully recyclable.